UPS-Teknik KR1000 Manuel d'utilisateur télécharger pdf (Page 15)

UPS KR Series 1~3KVA User’s Manual

-9-

Cooling mode: air-cooling;

Verticality: no shock with orthogonal rake not exceeding 5 .

2 Procedures of Dismantling Cases

When installing the equipment, the packing should be removed after carrying

the equipment to the installation site. The packing of UPS equipment and

fittings (battery, etc.) should be wooden case and carton. Check the UPS

equipment and fittings against the shipping list.

If the equipment or fittings are damaged during transportation or the equipment

and fittings are not accord with the ordering contract, make site record in time

and immediately contact the local office or distributors.

Refer to Table 3-1 for the equipment configuration.

Table 3-1 List of Equipment Configuration

Item Description Unit Qty. Remarks

1 AC wire Piece 1 KR 1000, KR 2000are sockets;

KR 3000 line bank

2 Fuse Piece 1 KR 2000, KR 3000 N/A

3 Software Set 1 Optional

4 User’s Manual Copy 1 Enclosed in grip bag

5 Packing list Copy 1 Enclosed in grip bag

6 Warranty Card Copy 1 Enclosed in grip bag

7 Battery

expansion line

Piece 1 Standard backup time model N/A

3 Installation of UPS

Because the main unit size of KR Series standard time-delay model and long

time-delay model is small, the UPS can be placed on the flat surface directly

without other fixing or installation. For convenient operation, maintenance and

heat emission of the equipment, there shall be at least 30cm~50cm room

space reserved around the machine frame and 50cm above the upper machine

frame. The vent fan shall be installed beside the battery. Keep good interior

ventilation. The service life of the battery is the longest when the battery is

used under normal temperature(20 ). Recommend to install air-conditioning

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Pas de commentaire

UPS-Teknik KR1000 Manuel d'utilisateur Page 15